Free file upload website – www.uploadland.com

Hello all. I recently acquired a domain www.uploadland.com and have finally gotten around to making it worth a damn! I had a company come in and recode it, so it works properly, and am in the midst of getting the site integrated with vB forums, so that I can do a lot of cool features ...

Corsair 600T – Full Acrylic Side Panel 13

So, after a few cuts of my acrylic piece, Bill, the owner over at MNPCtech.com, came over to my place, and dropped it off! It looks really clean, and it fits perfectly….without further ado : [zp src=”P1000125.JPG” album=”vivi/600T/acrylic” width=”500″] [zp src=”P1000121.JPG” album=”vivi/600T/acrylic” width=”500″] [zp src=”P1000123.JPG” album=”vivi/600T/acrylic” width=”500″]

Water Cooling an Antec 300 – Q9550 Round 2

So, I have decided to water cool my Antec 300 case….which acts as my 24/7 HTPC workhorse. Specs : Antec 300 Q9550 2GBx4 DDR2 3 x 2TB Samsung HDD 2 x 2TB WD Drives (backups) Asus P5N-D I started with an RS240 XSPC kit, but found the pump to be far too loud and not ...

Corsair 600T Water Cooled – i5 2500k – 2×6950 reference – 16GB DDR3 38

This is my second water cooling build, ever. I think it turned out really well. My temps are rock solid at full load, the GPU’s barely move up 5C when 100% in games. Idle around 27-30C on them. The CPU hits 35C on full load, but I have not overclocked it yet. best of all, ...

Water Cooling an Antec 300 – Q9550 2

So, I have decided to water cool my Antec 300 case….which acts as my 24/7 HTPC workhorse. Specs : Antec 300 Q9550 2GBx4 DDR2 3 x 2TB Samsung HDD 2 x 2TB WD Drives (backups) Asus P5N-D I started with an RS240 XSPC kit, but found the pump to be far too loud and not ...

Enabling “Unofficial Overclocking” in MSI Afterburner 2.1 1

I was looking for the proper way to enable overclocking in MSI Afterburner 2.1, and found a guide for an old version, but figured out how to do it in 2.1. go to where your MSI Afterburner is installed, for me/default it’s : C:\Program Files (x86)\MSI Afterburner open MSIAfterburner.cfg with wordpad or notepad There are ...

Installing ImageMagick/Imagick on a cPanel Server

I was having issues with my Zen install not being able to handle large images, so I read around and decided to move image cache’ing over to ImageMagick, instead of the GD library. This is what you need to do to install/enble ImageMagick on your cPanel server : You’ll need to be logged in as ...

0x00000006 error (cannot connect to server) when trying to add printers 21

Scenario : Dell E6410 with windows 7 PRO trying to add printer(s) – HP, from server xyz, returns error : Cannot Connect To Printer, when you expand you receive this code : 0x00000006 [zp src=”printerror.jpg” album=”blog/etc” width=”500″] What I tried : Removing everything related to the printer in registry (F3 is your friend) Adding other ...

Dell D630 – 8 beeps after post

I had this issue come across my desk, after pulling everything out, found out it was the keyboard. symptom : laptop beeped 8 times after post troubleshooting : pulled optical drive swapped memory – tested memtest pulled PCMIA card swapped keyboard – winner! hopefully this can help someone :).

How to unlock shaders on 6950 5

I recently purchased 2 XFX 6950’s. They are great cards, and doing some research, I found this forum post : http://forums.techpowerup.com/showthread.php?t=137136 It talks on how to unlock the shaders on the reference 6950 cards. I have an XFX so I used this modified bios : http://forums.techpowerup.com/showpost.php?p=2137536&postcount=343 These are my personal numbers : before : [zp ...